Y Type Diaphragm Valve

DESCRIPTION:                                                   

1) Material: UPVC, PA ;

2) Size: 1/2''(DN15) - 4''(DN100) ;

3) Working Pressure: 0.1-0.8 MPA ;

4) Joint End: DN15-DN50 (Union Ends), DN65-DN100 (Flanged Ends) ;

5) Working Temperature: 4-50℃

Working Principle:

Close the Valve:

Lead the control pressure source (water source or gas source,

with a pressure equal to or greater than the incoming water pressure) to the control chamber on the diaphragm.

The diaphragm pushes the valve seat through the valve stem, thereby cutting off the incoming water and closing the valve.

Open the Valve:

When the pressure in the upper chamber of the diaphragm is released,

the incoming water pushes open the valve stem through its own pressure,

opening the valve and forming a through chamber, allowing the fluid to pass through.

Technical Features:

It adopts an upper and lower dual-chamber design.

The water flow is controlled independently of the fluid chamber. Through the upper and lower pressure source terminals,

the valve opening and closing can be flexibly controlled to achieve normally open or normally closed at will.

The selection of pressure sources is also more diverse, which can be either hydraulic or pneumatic.

1) Pharmaceutical Industry

2) Coating plants

3) Electrolysis plants

4) Cooling systems

5) Mining Industry

6) Food Industry

7) Chemical and petrochemical industry                 

8) Water and water treatment technologies